TM
    


General Specifications:
5 inch wide arm rests with rounded edges for comfort (except outdoor keg bar).
The ends are designed so that the bar can be located with either end against a wall.
Front and sides are pine plywood with "beaded" surface. This new look is now being used in many fine bars and restaurants.
The base provides a built-in foot rest for "stand up" or bar stool use. No need to buy a brass foot rail.
Interior framework is concealed, and fasteners are hidden from view.
Base design is modular, making the length of the bar easy to change if desired. You can even combine base sections from various designs to build acustomized bar.
All bar tops (except for the outdoor keg bar) are "one piece" plywood. No surface joints to make.

"L" SHAPED KEGERATOR BAR
Dimensions: 96 3/4" x 48 3/4" x 46 1/4" High

This plan includes a Kegerator housing in the bar. You can use any standard size keg refrigerator up to 24" wide x 26" deep.
The Kegerator door is flush with the cabinetry for a built-in look.
The top cutout allows for the draft tower and provides room for glassware and mug storage below.
The plans show you how to build the bar as shown, and how to build the opposite configuration (Kegerator on the right side and short leg on the left).
All structural framework is concealed. The bottom shelf is removable, so that the area below can be used for utility lines if desired.
The completed bar can be separated into three sections for easy transporting.
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.

"L" SHAPED BAR WITH SPEED RAIL
Dimensions: 96" x 48 3/4" x 46 1/4" High

This plan shows you how to add a "mixing counter" and speed rail to your bar.
The mixing counter accommodates a lift-out stainless steel pan for use as an ice bin.
The top cutout insures easy access to mixing counter area.
"Speed Rail" holds up to 10 bottles.
Lower section can hold a 1.7 cu. ft. (or two) compact refrigerators for beverages.
You can build the bar as shown to the right or build the opposite configuration.
All framework is concealed for a clean finished appearance.
The bottom shelf is removable, so area below can be used for utility lines if desired.
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.

"L" SHAPED BAR WITH OPEN SHELVING
Dimensions: 96" x 48 3/4" x 46 1/4" High

Plenty of open storage behind the bar.
This is the easiest and most economical of the L shaped bars to build.
The plans show you how to build it as shown or build the opposite configuration.
Clean lines inside and out. All framing is concealed.
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.
The bottom shelf is removable, so the area below can be used for utility lines if desired.
The completed bar can be easily separated into three sections for transporting.


"L" SHAPED BAR WITH WET SINK
Dimensions: 96" x 48 3/4" x 46 1/4" High

Add running water to your bar.
The recessed counter accommodates a standard 15" x 15" drop-in stainless steel bar sink.
The top cutout insures easy access to the counter area.
The lower section can hold a 1.7 cu. ft. compact refrigerator for beverages.
You can build this bar as shown here or build the opposite configuration.
Features clean lines inside and out. All framing is concealed.
The bottom shelf is removable, so that the area below can be used for utility lines if desired.
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.
The completed bar can be separated into three sections for transporting.
BACK BAR "NARROW DESIGN"
Dimensions: 94 1/2" x 7 5/8" x 84" High.

Designed to match front bars, this back bar is less than 8 inches deep. Perfect for locations where floor space is limited.
The unique wine display rack makes labels easy to see and keeps corks wet.
Mirrored upper section uses brass finish dual access stemware holders.
There is plenty of horizontal and vertical bottle storage below.
The entire unit is supported by the floor but attached to the wall for a safe and secure installation.
The bottom rear can be easily notched around baseboards if necessary.
The flat back panel can be cut out around existing wall outlets.
The unit can be separated into two sections for transporting.
BACK BAR "COMPACT DESIGN"
Dimensions: 42" x 22" x 79 3/4" High

Unique "stemware rack" design suspends up to 18 standard wine glasses.
Mirrored upper section can accommodate standard under cabinet lighting if desired.
Stationary wood shelf and adjustable glass shelf provide additional display area above counter top.
Unit is deep enough to install and optional bar sink in the counter top at either end.
Interior of base has adjustable center shelves if no fridge or wine rack is used.
Base cabinet openings accept standard size kitchen wall cabinet doors (Optional). Details are provided for flat doors with concealed hinges.
Two compartment base will accept an optional 2 1/2 cubic foot refrigerator or wine cooler at either end where no sink is installed.
Plans include an optional four tier removable wine bottle display rack for up to 16 bottles.
STRAIGHT BAR WITH SPEED RAIL
Dimensions: 97 1/2" x 28" x 46 1/4" High.

This plan shows you how to add a "mixing counter" and speed rail to your bar.
The mixing counter accommodates a lift-out stainless steel pan for use as an ice bin.
The top cutout insures easy access to mixing counter area.
"Speed Rail" holds up to 10 bottles.
Lower section can hold a 1.7 cu. ft. (or two) compact refrigerators for beverages.
All framework is concealed for a clean finished appearance.
The bottom shelf is removable, so area below can be used for utility lines if desired.
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.
STRAIGHT BAR WITH KEGERATOR
Dimensions: 96 3/4" x 28" x 46 1/4" High.

This plan includes a Kegerator housing in the bar. You can use any standard size keg refrigerator up to 24" wide x 26" deep.
The Kegerator door is flush with the cabinetry for a built-in look.
The top cutout allows for the draft tower and provides room for glassware and mug storage below.
You can build the bar as shown, or build the opposite configuration (Kegerator on the opposite side).
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.
All structural framework is concealed. The bottom shelf is removable, so that the area below can be used for utility lines if desired.
The completed bar can be separated into three sections for easy transporting.
OUTDOOR KEG BAR FOR DECK OR PATIO
Dimensions: 76" x 29 1/2" x 44" High
This attractive bar can be kept outdoors all year long.
Accepts up to a 10 foot umbrella with an 1.5" diameter pole and pulley lift system.
The bartender's side has an adjustable counter height work shelf area and can accommodate a 1/2 keg of your favorite draft beer for backyard picnics and pool parties. The shelf is adjustable and can be relocated when not using a keg.
Designed using standard Cedar decking lumber.
STRAIGHT BAR WITH WET SINK
Dimensions: 97 1/2" x 28" x 46 1/4" High.

Add running water to your bar.
The recessed counter accommodates a standard 15" x 15" drop-in stainless steel bar sink.
The top cutout insures easy access to the counter area.
The lower section can hold a 1.7 cu. ft. compact refrigerator for beverages.
You can build this bar as shown here or build the opposite configuration.
Features clean lines inside and out. All framing is concealed.
The bottom shelf is removable, so that the area below can be used for utility lines if desired.
The ends of the bar are designed so that the bar can be placed against a wall where space is limited. This also provides extra storage space under the bar.
The completed bar can be separated into three sections for transporting.
"PORTABLE" BAR WITH SPEED RAIL & ICE BIN
Dimensions: 60" x 28" x 47" High.

Perfect for smaller rooms or outdoor parties! This "Five Footer" is light in weight yet heavy duty.
Mixing counter accommodates a lift-out stainless steel pan for use as an ice bin.
Top cutout insures easy access to mixing counter area.
Full length "Speed Rail" holds up to 10 bottles.
Twin wheel locking casters.
Lower section can hold a 1.7 cu. ft. (or two) compact refrigerators for beverages.
STRAIGHT BAR WITH OPEN SHELVING
Dimensions: 97 1/2" x 28" x 46 1/4" High.

Constructed in 3 sections, this bar can be unassembled, relocated, and reassembled if necessary.
Interior framework is concealed, and fasteners are hidden from view. Inside surfaces are flat, making it easy to add special features such as a wine rack, adjustable shelves or even a 2.5 cubic foot mid-size compact refrigerator.
Plenty of open storage behind the bar. Bottom shelf is removable. Clean lines inside and out.
The completed bar can be separated into three sections for easy transporting.


ALL TWELVE plans are included. TEN bar plans, plus Two back bar plans.











Copyright © 2009-2014 Precision Images Design Inc.   All Rights Reserved





























Copyright © 2009-2014  Precision Images Design Inc.   All Rights Reserved